Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Sim Racers 4 Life - Fun Events - AC Cobra at Olton Park
#1
[Image: 1fd7cy.jpg]

Welcome to Sim Racers 4 Life Fun Events.
This event we will drive the AC Cobra in Olton Park. Prepare to try to tame the beast in this british classic challenging track. It won't be easy, the bumpy surface and changes in elevation will make you battle the wheel as you've never done before. Fun driving and battles are guaranteed.


SR4L wishes you good luck for this fun event.

[SIZE=24px]Please Read The News Before Entering This Event[/SIZE]


Race day Information

2x17 Laps
Race 2 Reverse Grid (Top 10 finishers)

[b]4th October 2015


17:25 GMT (17:25 BST - 18:25 CET - 12:25 EST)
120 minute practice
19:25 GMT (19:25 BST - 20:25 CET - 14:25 EST)
30 minute qualifying
20:00 GMT (20:00 BST - 21:00 CET - 15:00 EST)
Race 1 - 17 laps
--7 minute warmup--
Race 2 - 17 laps

1 mandatory pitstop must be done during the race with all four tires changed
[/b]

Track:
https://mega.nz/#!x1gnmDzB!SZWsT1t-EL43a...g3XMWzoqd8
Car (ISI Official):
https://www.mediafire.com/view/faj4d58or...v103.rfcmp
rfmod (in case getmod doesn't work):
...to be announced...


Server Settings

Server name: !SR4L Server 1
Fuel usage: Normal
Tyre wear: Normal
Damage: 0%
Auto Clutch on

Weather forecast in Olton Park for October 4th at race time (will be periodically updated until race day)

[Image: nTEKE4eqc.png]
-Skies: partially sunny
-Humidity: 70%
-Temperature: 17ÂșC
-Wind: 21km/h from South


Note:
Please read our "Sim Racing Etiquette" post http://www.simracers4life.com/index.php?topic=828.0
Please read our "Members Expectations" post http://www.simracers4life.com/index.php?topic=70.0

Don't hesitate in joining Sim Racers 4 Life http://www.simracers4life.com

Please check this post periodically for posible changes.

SR4L discord channel: https://discord.gg/h5RZTcEcbA
Reply
#2
thanks Gorka Wink

Paul
if you need a road file for oulton park vr. 1.11 - International NC layout - I attached one.. AI generated!


Attached Files
.rrbin   oulton SR4L.rrbin (Size: 37.26 KB / Downloads: 7)
Reply
#3
Can we get the server up so we can start practicing , we gonna need lots of it for these monsters :-*
Understeer - is when you hit the wall with the front of the car
Oversteer - is when you hit the wall with the back of the car
Horsepower - is how fast you hit the wall
Torque - is how far you move the wall when you hit it
Reply
#4
This car ask for a very, very, gentle right foot.
Reply
#5
In the laps I've done to calculate race length the car was a beast to be tamed. Don't know if setup can help make the car throtle and coast less aggressive.
SR4L discord channel: https://discord.gg/h5RZTcEcbA
Reply
#6
And the track is really slippery when green too... Some rubber will do it ^^
Reply
#7
Sorry for delay guys. Server will be up tonight
Reply
#8
Guys we may want to rethink using the cobra here , the car is a handfull and i sensed some people were not enjoying it when we practised last night , seeing as how this is supposed to be a fun event we might want to choose something easier and save the Cobra for a smoother more open track like Brianza .

I suggest we choose something easier to drive like F3 , Megane OR KARTs , Oulton used to host Kart racing but had to stop because of the numbers of deaths and injuries , what does everyone think ?
Understeer - is when you hit the wall with the front of the car
Oversteer - is when you hit the wall with the back of the car
Horsepower - is how fast you hit the wall
Torque - is how far you move the wall when you hit it
Reply
#9
which was the other car that was similar to the Cobra but less powerful? We could use that.

Edit: The panoz it was.
SR4L discord channel: https://discord.gg/h5RZTcEcbA
Reply
#10
i d rather drive an old cobra than a panoz anyday Wink you two got noting to say- you seem to be able to handle the car -

after you left last night , we were catching on and having more fun Smile.....if you dont 'try' to go fast and just let it - it gets easier -keep the rpms down- enter corners slowly- get the car straight and go- 8)
Reply
#11
cookie Wrote:i d rather drive an old cobra than a panoz anyday Wink you two got noting to say- you seem to be able to handle the car -

after you left last night , we were catching on and having more fun Smile.....if you dont 'try' to go fast and just let it - it gets easier -keep the rpms down- enter corners slowly- get the car straight and go- 8)

Yes i can push it round the track quickly , but this is about FUN racing , when we all get on the track with these its going to be a crash fest and very frustrating for some , lets make it light hearted and go more for the fun aspect rather than skill , choose something thats easy to drive so we can go wheel to wheel and hustle each other , theres no points involved so lets make it a laugh .
Understeer - is when you hit the wall with the front of the car
Oversteer - is when you hit the wall with the back of the car
Horsepower - is how fast you hit the wall
Torque - is how far you move the wall when you hit it
Reply
#12
So, any talk about the car this past night on the server?. I'll be going away tomorrow until sunday afternoon, will check the forum periodically.
SR4L discord channel: https://discord.gg/h5RZTcEcbA
Reply
#13
deecee52 Wrote:lets make it light hearted and go more for the fun aspect rather than skill , choose something thats easy to drive so we can go wheel to wheel and hustle each other , theres no points involved so lets make it a laugh .

How about the smaller tin tops like the clio then?

I think it would work well on a twisty track like this?
Reply
#14
Change of plan. Because its a fun event we will stick with the Cobra but damage will be set to Zero.

That way if there are crashes you will only lose places and be able to continue racing. I have edited the OP to show this.
Reply
#15
Paul_Swire Wrote:Change of plan. Because its a fun event we will stick with the Cobra but damage will be set to Zero.

Great decision 8)
[Image: p8xN8ZK.png]
Reply
#16
Indeed
Reply
#17
Just saved this real road file from our server.. not that much rubber but it's a start. Would appreciate if Paul could upload to both servers Smile

https://www.dropbox.com/s/sfmdel3s0pdc4f...rrbin?dl=0
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)